Search results

Over the weekend, I found an alarming oil leakage under the car, lots and lots dripped out of it. When I pulled the dip stick out, it was way past the low line. It seem to have happened over time gradually more and more until I drove it on Friday, where I found the belts were slipping. Found...

Hi, after a EP91 dash loom diagram if possible? After EP91 Glanza V and EP91 NA (the very standard version)

Hi, I wanna know if Glanza V and Glanza S have different type of electric mirrors? Do both of them have the electronic retract function? Reason I'm asking is that I've changed my right hand mirror, now only the left retracts. Both left and right look the same, pretty sure they're Glanza...

Hi, I've been seeing the check engine light come up on situation where I'm overtaking. On the highway doing about 80kph, shift down to 3rd gear and press the accelerator. The engine revs up and boost come up as usual. But then I see the check engine light on. I dont think I've hit the fuel...

Hi all, I'm wiring a Glanza mirror control into the car (it has no electric mirror loom). I'm only down to 2 last wires Grey White I believe these are the 12V and 0V to power the mirrors. Which one is 12V? Thanks!

Plan to get a major service done to the car this new years. I'm looking at this service kit: http://speedvisioncps.com/index.php?main_page=product_info&cPath=40&products_id=140 Is it a good value or where else can I buy all these service items. Mainly looking for engine gaskets and...

Tein Coilover - Ride Height Question Hi, I fitted set of Tein Superstreet coilovers and adjusted to lowest setting on the weekend. the car sits nice and low and looking awesome, but I'm getting some scrapping issue with the tyres. Car specs: EP91 Tein Superstreet with camber tops...

I'm wondering if there are any difference in the feel of the car with different types of strut braces. The Cusco ones are very light, but they are connected with a bolt where the strut top and bar can move around. The Ultra-Racing ones are one solid piece of heavy metal that does not move...

I got the non-electric powered mirror doors and would like to convert them to electric powered. I can source a pair of Glanza electric mirrors and the dash control. But don't have any wiring harness for the mirrors. Would I need to have to get the harness or it can be obtained/made easily...

Is the ignitor for EP82 and EP91 same? Here is a picture, seems like EP82 ignitor. Can anyone tell me what signal is each wire?? And where they connected to?

What other harness do I need with the E-Manage Blue? Do they have plug & play harness for EP82? Also, where would be best to buy one from? price + shipping wise...

Hi, What should I consider when shopping for an oil catch can? There are many variation in shape/sizes and obvious price. Some with breather and some without... It's just an aluminium can that collects spit out oil from the crank case right? What size and type should be good fit for 4EFTE...

What's the difference between the -IGN signal (from distributor I think) and the NE(Integrated igition feedback) pin from the ECU? Are they both square wave forms with same amplitude and frequency?

I'm looking at installing a UR fender bar. Does it involve welding or drilling into the chasis?

I'm looking at buying a SARD FPR. There are few on eBay but not sure if they fit the 4EFTE. I've heard that you need an adaptor to fit, but what's the adaptor size/model? What size for the FPR do I need? In terms of the connector to fit the fuel line... Thanks!

Anyone bought bodykit items from ID_Workz on ebay? If so, what's your thoughts about their service and quality of the body kits?

I'm planning to take my CT9 up to about 1BAR boost. Here are the parts that I have got so far: HKS actuator RX7 TMIC New spark plugs and HT leads custom mani and dump pipe HKS FCD Have I missed any parts needed?

Hi, If I transplant the EP82 4EFTE engine, ECU and wiring loom into an EP91 body, to put in the EP91 Glanza cluster, would the tacho still work? Do they share the same type of rpm signal from the distributor? I've tried hooking up the Glanza cluster in it, nothing on the tacho. Put in an...

What is the boost level I should set on the CT9 HKS actuator without aftermarket manifold or dump pipe? Planning to get those, when money allows. For time being, just want to crank the boost up a bit. I have a RX7 TMIC and cold air intake in place as well. No FCD so will have to stay under...

Anyone has any experience to share about the Autobahn88 exhaust manifold and dump pipe? Looking at getting new manifold and dump pipe, any recommendation (and where to get)? Thanks!