Search results

Hi does any one knows where it goes..i tried to trace it from them fuel pump...seems to go under the dash in a connetor.but cant see any blue white wire connected to the pump relay..could not trace it from the connector un the dash..where does it go?

Hi guys..am having some intermitent problem sometimes the engine wont start and when i checked its the walbro not working and when i check the voltage on the blue and white wire just b4 the pump its zero...continued the troubleshooting till the connector under the dash still no voltage..am...

Hi am trying to adjust my tps. and each time its changing my timing..so. how do i proceed?which one to adjust first..was thinking about loosening both tps and distributor screw,move the tps till my timing is 10 degres and then tight sll the screws..is thak ok?

Hi..fitted a new walbro today also changed the fuel filter..now the problem is that the car hesitates to start..it starts only after 3 or 4 times after turning the ignition..it also hesitates under boost..seem to be a lack of fuel..wideband reading lean under boost..whats ur opinion guys

Hi guys, will a 460 cc injector be ok to fuel a td 04l at 1 bar with all the supporting mods.an using greddy emu..wont they be too big..?i know stock one should be ok..but the are maxing out at .8 bar..what ur opinion.

Hi jisy a quick one...if u have ur engine on and remove the coolamt temp sensot plug...should the fan kick in instantly..

Hi...does the glanza or gt share the same ect as a starle na..thks..really need to know this as am having to source a glanza one actually

Hi..my car is running. rich on idle 11.8 ..even when the engine heats up..ive did a boost leak test no leaks..whats ur opinion guys..thks

hi ..got a big problem..car not starting.also cetral lock..so sometimes it starts but as soon as i put the. handbrake down the engine goes off..actually when i turn then. ignition the starter is not working..:confused:

hi i want to know which boost source u have used to feed the external wastegate and the boost controller pressure sensor..... i plummed my wastegate boost source in the compressor outlet and the pressure sensor to the intake mani.... some people are saying the pressure sensor should also be...

hi guys am actually facing a big problem but seem that i cant find a solution,really need ur help on this i got a set up with tial external wastegate and a hks evc s to control the boost.. the problem is ,i got a .7 bar spring pressure in my wastegate but when the boost controller is OFF,i...

hi guys am having a boost leak right where the tbody spindle goes in the throttle body..i diassembled it and noticed there is seal in the the body,that where the leak is coming from,,, hav eu guys ever changed this seal..? coz i never heard abut someone talking about this before..

hi people am encountering great handling problem...i cant hold the car straight on road...the car moves from side to side even on .5 bar.....i dont think its torque steer....coz its scary the way it moves. someone checked the suspension ,alll the bushes in lower ars are ok,the shocks are...

hi guys got a friend who is having a problem since he swapped from na to a ep82(gt)engine... the problem is that after a long drive his oil light come on...and also there is like a cup of water missing in the radiator,but the water resevoir keeps overflowing,that is water from the rad goes...

hi guys this might be silly but...i want to confirm... on which gear do u test ur turbo spooling? for example if u want to know on which rpm does ur turbo starts spooling and which rpm is full boost. also normally i check on on the boost light on the dashboard for boost starting and on...

hi guys noticed a thing last morning,starts the car and when it starts heating i could notice drop of water and carbon coming out of the dump pipe of my wastegate(same as when exhaust has ware coming out in the morning) is this normal ,,,:(

hi what do you think will be quicker on a quarter mile... a td 04 glanza with all supporting mods or a toyota corolla ee 111 with a caldina st 215(3sgte)..which is 256 bhp...and running stock boost .95bar :)

hi to all of u i bought a pair of skyline r32 calipers..for the glanza.. am wondering which disc i can use with it...thick ones.. does anyone have any idea ...i got 15 inch rim with offset 35.. thks stephan

hi anyone of u ever seen this little glanza...hahha take a look at all the runs:) http://www.youtube.com/watch?v=44Z8Q-1jPGk&feature=related http://www.youtube.com/watch?v=gMEfkqdXCc8 http://www.youtube.com/watch?v=eOHdW2f-R3E&feature=related

hi have any one here ever tried mr2 rev 2 twin pots caliper on a starlet does the caliper bolt straight on..?i know i will need some spacers, i waana use it with levin disc, also does the mr2 rev 2 caliper use the same pads as the starlets and the ae 111?