Search results

Hi, I've got an EP91 and one of my headlights has a snapped mount as does the indicator meaning they rattle around a little. I've managed to 'pikey' them in for the moment, however 99% of my car is perfect and I just want to finish it off. I'm in Newcastle, work in the UAE and also in...

I'm looking for a whole front end light setup. Both of my headlights have broken adjusters and are less than perfect, my drivers side indicator has a snapped securing bracket so I'm looking to replace it. Anyone with a whole front end, maybe someone breaking an EP91? I work in Reading but...

People, Ovet the last year I've noticed a vibration inside the dash, not 100% sure as to whether it's coming from the edge of the drivers doors where it contacts the drivers side of the dash or inside the dash. So far I have ... Removed the drivers door inner lining and door card, still a...

Hi people, Was good to meet a few of you there today, I hope the free exhaust I handed out comes to good use. Keep me posted if it resolves your problems. Cheers, Sii (the ex skin head with the out of control fashion hair and TD04's Glanza)

Hi people, My current headlights have a few broken adjusters and one of my indicators has a broken screw connector. Ive got a 96 Plate Glanza, so my indicators have the sticky-out bits. Does anyone know where I can get a set of headlights and indicators from? Cheers in advnace, Sii

People, As you've probably seen my posts of late regarding the eManage ECU then the dropping boost once at 1bar, well after some advice from guys on here, my local tuners XO Power Tuning and then ASP in Birtley I now have a working motor just waiting for fine tuning on the RR. Can't...

Part: ULAT1-1670-2BZ ULTRALITE A-TEC Price: £95.00 (£109.25 Including VAT at 15%)Quantity: Ultralite ATEC Rim Size: 16" PCD: 4 x 100 Size Width: 7.0" Offset: 43mm Colour: Satin Bronze _____________________________________________ What's the correct offset from Toyo' and...

Guys, Just about to wire in an HKS FCD and the car has a SAFC wired in, obviously they share the same wires. Is there a rule to which has to go closest to the ECU? Cheers In the garage now on the laptop ..... Sii

I have used the search function for an hour and although there's lots of people asking for the size of the bulbs there is no answer. Headlights - H4, that wasn't a problem, but foglights ... pass. I need to get a new bulb as after putting the bumper back on the car I have realised I forgot...

I've had the eManage issues resolved by XO Power Tuning in Cramlington near Newcastle, however I've now noticed that when setting to the boost to 1bar on the HDi EBC it spikes to 1 bar then slowly creeps down to 0.5 What could this be due to? a weak spring in the actuator? it's not an HKS...

Does anyone know where the plug should go for the water pump thermostat? I'm just about to take mine for it's MOT after the fitting on the TD04 but it's not cooling down. I have fitted a new fan that works when fed from the battery but not from the harness, going to check the feeds in the...

Well I got the car running, with just the down pipe on so I am a little deaf :) However I'm using the jimmy cranky stile mini radiator that came with my TD04, I've reused the original water feed and return pipe. I've got the top hose on the rad going into the front facing water pipe, the...

People, The TD04 is fitted, the rad and FMIC are back on and all plumbed up. Now I need to get the car RR tuned, can anyone recommend anywhere in the Newcastle area? I was going to take it to XP (I think that's right) tuning on the team valley. Thanks for the help in advance

I'm going to order a new exhaust today but I wasn't sure which is better sounding, I'm looking for a beefier note without it droning on motorway speeds. HKS Hi-Power Silent, Blue flame or Blitz Nur Spec? I'm going to order it from TM Developments as they appear to be the only supplier...

People, Got a few weeks off work due to a gap in my contracts so I thought I'd eventually get around to fitting the TD04, wiring in the Emanage blue and EBC. Now that I have the turbo fitted I'm replacing the worn vacum pipes with nice hardcore stuff from the local hydraulic suppliers. Now...

I've been looking at the registered traders and for sale sections yet can't find what I want. I'm after an HKS Super Silent, I want a nice sounding exhaust without it being droney on the motorway. Anybody got any ideas? Unless someone can suggest another make of exhaust that isn't too loud an...

Black wheels, roll cage, carbon/black bonnet. Looks tidy, I think you were dropping your good lady off..... I was upstairs banging on the window!

Lovely car, was two up, very clean, shiny even! However I was at the speed limit and you passed me the other way going some what faster than all the other cars ... and you were on your phone! Well done you shit blistering crab wanker :) .. 3 points and a good fisting from my colleague if...

I was on the way to my girl friends house, I was in the Monaro, spotted a very clean white Glanza with black bonnet, I give a beep but not sure if you heard me. Lovely example, very tidy.

Parked on the corner near to the A61, I was on my way to Beckwithshaw, passed in the Monaro at 8am, exhaust on loud (electric switch) hope I didn't wake you up.